Jiffy Jet ™ PRESS-IN COOLANT NOZZLE n Just drill and ream a hole, press in a JiffyJet, and you’ve got an easily aimable coolant nozzle! n Ideal for special tooling, VDI holders, CNC lathe tooling, screw machines, etc. n Rated to 150 psi (10 bar) maximum n ±35° of adjustment either side of centerline Material: Body - Acetal Ball - Stainless Steel Max Operating Temperature: 160°F (70°C) Maximum Pressure: 150 PSI (10 bar) DIMENSIONS IN INCHES (except as noted) Part No. Nom. Dia. “D” A B Orifice Dia.“d” E(degrees) Prepared Hole Dia. Pkg Qty JJ07050   1/4 inch .190 .05 .08 35° .250/.2515 5 JJ00103 5/16 inch .250 .06 .11 35° .3125/.3145 5 JJ00104   3/8 inch .312 .08 .16 35° .375/.377 5 JJ00105 7/16 inch .360 .10 .16 35° .4375/.4395 5 JJ00106 9/16 inch .437 .13 .22 35° .5625/.5645 5 JJ00118   5/8 inch .437 .13 .22 35° .625/.627 5 JJ07160 6 mm .190 .05 .06 35° .2362/.2377 5 JJ07150   6 mm .190 .05 .08 35° .2362/.2377 5 JJ00119   8 mm .250 .06 .11 35° .315/.317 5 JJ00113 10 mm .312 .08 .16 35° .3937/.3957 5 JJ00114 12 mm .360 .10 .16 35° .4724/.4744 5 JJ00115 14 mm .437 .13 .22 35° .551/.553 5 JJ00116 15 mm .437 .13 .22 35° .5906/.5926 5 – Please contact us for availability of other sizes or for special orders – Cutaway view showing JiffyJet installed. Drill coolant passage, leaving reaming allowance. 1 Ream hole to nominal size -0 +.002." 2 Press in JiffyJet until body is flush. 3 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE OR OBLIGATION. 30